A tyre’s second life starts with its first record. Tyres are in the 2027 wave of the Ecodesign for Sustainable Products Regulation — and no product shows the logic of the Digital Product Passport better. It is built to live twice through retreading. Its main natural raw material already has a deforestation file. And its wear is becoming regulated too.
Third in the queue, in the 2027 wave
The ESPR, Regulation (EU) 2024/1781, entered into force on 18 July 2024 and names tyres among its priorities. The Commission’s Working Plan 2025–2030 (COM(2025) 187 final, 16 April 2025) places tyres third among final products, in an EU market of EUR 45 billion (2021), citing potential on recyclability, recycled content and end-of-life waste management. Indicative adoption of the delegated act: 2027.
Indicative is a planning signal, not a legal deadline. And adoption is not application: under Article 4, application “shall not be earlier than 18 months from its entry into force” — a planning estimate, not a date in law. The full sequence is in our ESPR timeline.
Tyres already carry regulated data
Under the Tyre Labelling Regulation (EU) 2020/740, applicable since 1 May 2021 to C1, C2 and C3 tyres, every tyre carries a label and a product information sheet (Article 4): rolling resistance, wet grip, external rolling noise, and snow or ice grip. Suppliers must enter the Annex VII information into the product database (EPREL) before placing a tyre on the market, and keep it for five years after the final unit (Article 5). What the label does not carry is the life of the product — composition, origin, recycled content, second life, end of life. That is the passport’s layer, tied to a unique product identifier (Article 10).
Retreading: the second life that already exists
Retreading removes the worn tread, preserves the inspected casing and applies a new tread. Production is approved under UN Regulations No 108 (passenger cars) and No 109 (commercial vehicles), compulsory in the EU since 13 September 2006. Its value sits in the casing’s history: identity, age, inspections, repairs. Under Article 2(1) of the Labelling Regulation, its requirements extend to retreaded tyres only once a suitable testing method is available — the label does not yet follow the second life. Whatever level the delegated act chooses (Article 9(2)), retreading is the argument for a record that follows the casing, not the tread.
Natural rubber already has a file: the EUDR
Rubber is one of the seven commodities of the EU Deforestation Regulation (EU) 2023/1115. Annex I, as amended by Delegated Regulation (EU) 2026/2102 (in force 18 September 2026), lists new pneumatic tyres (ex 4011), inner tubes (ex 4013) and tyre treads for retreading (ex 4012 90 30) — and removed retreaded and used tyres from the scope. Article 3 requires the rubber to be deforestation-free (cut-off 31 December 2020), legally produced, and covered by a due diligence statement, with geolocation of the production plots. Application: 30 December 2026, and 30 June 2027 for micro and small undertakings. That origin file is passport data, as our EUDR guide sets out.
Wear becomes regulated too: Euro 7
The Euro 7 Regulation (EU) 2024/1257 brings tyre abrasion into type approval: tyre emissions are estimated to be the largest source of microplastics released into the environment, and non-exhaust emissions could reach 90% of road-transport particles by 2050. The staging runs by class — new C1 types from 1 July 2028, C2 from 1 April 2030, C3 from 1 April 2032. Abrasion is a property of compound and design: its test record belongs in the record.
What the tyre passport will have to carry
Only the delegated act can fix the list (Article 9(2): data, carrier, level, access, duration). Collect now the families the framework already names:
Tyre passport — data to collect now
- Identity: persistent unique product identifier and data carrier (Article 10), casing continuity across retreading;
- Label data: rolling resistance, wet grip, noise and snow or ice grip classes, and the EPREL registration (Regulation (EU) 2020/740);
- Composition and origin: compound families, steel and textile reinforcement, natural rubber origin linked to the EUDR file;
- Substances of concern: tracked through the life cycle under Article 7(5);
- Recycled content and recyclability: what recyclers need to recover the rubber, steel and textile fractions;
- Second life and end of life: retreadability, casing inspection and repair history, dismantling and recycling information.
None of this is a final checklist — only the act can make it one.
What tyre makers and retreaders should do now
- Map your scope: C1, C2 and C3 lines; track the delegated act and the 2028 mid-term review.
- Build the rubber file under the EUDR: geolocation, legality and due diligence for the rubber share, treads included.
- Join the records you already keep — label and EPREL data, abrasion tests, compound families — in one backbone.
- Record the casing: identity, inspection and repair history, so a second life can be proven.
- Fix identifiers early: open standards, a carrier that survives the tyre’s life and a retread.
- Choose your provider carefully: a back-up copy must be held through a DPP service provider (Article 10), which may not sell or re-use passport data beyond the service (Article 11).
How Ledger Consortium helps
Ledger Consortium aggregates the product data held by you and your suppliers, anchors each passport record on a governed blockchain — timestamped and tamper-evident — and keeps it updated as the rules land. Anchoring proves a record existed and has not been altered; it does not certify that the data a client supplied was true — accuracy remains the responsibility of the operator placing the product on the market. Costs are predictable, there is no token and no crypto exposure, and the platform is GDPR- and eIDAS-aligned. In Italy, the Ledger DPP is distributed by Il Sole 24 Ore (Valore24), whose channel onboards dozens of companies per month. See a working passport in our live demo and more in News.